| Jeep, Truck & SUV Winches: PowerPlant HP |
| |
 |
WARN POWERPLANT DUAL FORCE HP
Air up four 35" tires in 8 minutes-or less |
Versatility times two. A best-in-class air compressor
and a powerful WARN winch in one versatile unit. Whether you're winching and airing
up while off-roading; inflating a raft or air mattress; running a nail gun or impact
wrench; the PowerPlant is the way to get things done.
- Winch features a 3-stage planetary gear train, Gen II series-wound motor with
thermal protection switch, free-spooling clutch, integrated direct-drive cone brake
- 9,500 lbs. pulling capacity, 125' of 5/16" rope, fast line speeds
- Air compressor delivers enough air to operate a variety of air tools or quickly
inflate a raft. Max air pressure: 100 PSI, CFM rating: 12 CFM @ 0 PSI, 5 CFM @ 90 PSI. Onboard features include: integrated intercooler, pressure switch, thermal
protection shutoff switch and air hose quick disconnect
- Includes next-generation remote control, hose and basic air fittings and couplings
Air Compressor Mode
Winch Mode
|
| POWERPLANT HP SPECS/PART NUMBER |
| Part Number: 71800 (12V) |
| Rated Line Pull: 9,500 lbs. (4310 kgs) single-line |
| Motor: Gen ll Series Wound 4.6 hp 12V, with Thermal Protection Shutoff Switch |
| Electrical controls: Contactor |
| Remote Control: Remote switch with Thermometric |
| Geartrain: 3-stage planetary |
| Gear ratio: 156:1 |
| Clutch (freespooling): Sliding ring gear |
| Brake: Integrated direct-drive cone brake |
| Wire rope: 125 ft of 5/16 in (38m of 8mm diam.) |
| Fairlead: Roller |
| Recommended battery: 650 CCA minimum |
| Battery leads: 2 gauge, 72 in (1.83m) |
| Finish: High-gloss black powdercoat |
| Drum diameter/Length: 2.5 in/9 in (6.4cm/23cm) |
| Weight: 100 lbs (45 kgs) |
| Air Reservoir: 1/2 gallon tank with |
| High Air Flow Rating:: 12 CFM @ 0 psi, 5 CFM @ 90 psi |
| Max Air Pressure: 100 psi |
| Air Pressure Switch: Yes |
| Air Hose: 12 in nylon, with quick-disconnect. Brass air fittings and couplings |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
26.9 (8.2) |
88 amps |
1/9500 (4313) |
| 2000 (910) |
14.6 (4.45) |
195 amps |
2/8650 (4927) |
| 4000 (1810) |
10.3 (3.14) |
262 amps |
3/7920 (3595) |
| 6000 (2720) |
7.8 (2.38) |
345 amps |
4/7400 (3359) |
| 8000 (3630) |
6.1 (1.86) |
420 amps |
5/6940 (3150) |
| 9500 (4310) |
5.2 (1.58) |
454 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
| Winch Dimensions: 24.31" L. x 7.0" D. x 13.46" H. (617.5mm L. x 177.8mm D. x 341.9mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |
|
|
|
Replacement Parts 
